In stock
This Product is Available and ready to Dispatch
Trusted Vendor Since 2019
Competitive Prices With Delivery To 125+ Countries
Certified Authentic Products
24/7 Customer Support
This Product is Available and ready to Dispatch
Competitive Prices With Delivery To 125+ Countries
24/7 Customer Support
$3,299 0.05752 BTC
Final Price
+20 Cryptocurrencies Accepted As Payment.
Estimated Delivery Date: in 4 days
Certified products with order tracking via Email & SMS.
No questions asked, 30 days return policy.
From the first watt to the last watt, no audio power amplifier offers lower noise or lower distortion than the Benchmark AHB2.Benchmark has raised the bar by introducing a new and revolutionary amplifier!
-Bascom King, BHK Labs
“If ever there were a giant-killer of an amp, this is it.”
– Hans Wetzel, SoundStage!
– John Atkinson, Stereophile
The AHB2 is the ideal match to the performance limits of High-Resolution-Audio (HRA) formats. Benchmark’s AHB2 power amplifier delivers musical details without introducing the masking effects of amplifier noise and distortion. The dynamic range of the AHB2 is 132 dB, making it 10 to 30 dB quieter than some of the very best reference-quality power amplifiers.
The frequency response of the AHB2 extends beyond 200 kHz. With the AHB2, you will discover previously overlooked nuances, dynamics, and detail in your favorite recordings and experience the full potential of the latest high-resolution 24-bit PCM and 1-bit DSD audio formats.
The musical details and emotion captured on today’s finest High-Resolution-Audio recordings can only be fully appreciated when every component in the signal chain is capable of true high-resolution performance. Power amplifiers are a weak link in most audio systems. Most power amplifiers are well matched to the limitations of the CD format, but they fall well short of the capabilities of high-resolution formats. In contrast, the revolutionary AHB2 was specifically designed to deliver true high-resolution performance.
– Ben Shyman, Home Theater Review
D/A conversion technology has outpaced the development of new power amplifiers. This means that the power amplifier has become a limiting factor in many audio systems. For example, the noise and distortion produced by the Benchmark DAC3 D/A converter is 20 to 30 dB lower than that produced by most high-quality power amplifiers. Until now, this meant that the DAC3 could not be fully appreciated. Benchmark set out to solve this problem by creating an amplifier that matches the performance of the DAC3.
We had to look beyond existing amplifier technologies and explore some new and radical solutions. In our search, we learned of two new patents on a new amplifier technology from THX. This was exactly the technology we needed to build our new amplifier.
The AHB2 uses the new and revolutionary THX-patented AAA™ technology to virtually eliminate all forms of distortion. This technology uses feed-forward error correction to eliminate the distortion that is normally produced by the output stage. No other audio amplifier comes close to delivering the clean, quiet, and robust power of the AHB2.
Many loudspeakers have frequencies at which their impedance drops to levels that are much lower than the “nominal” impedance. The AHB2 drives difficult phase angles and low impedances with ease. Stereo loads as low as 1.4 Ohms can be cleanly driven to full output levels. Most power amplifiers produce higher levels of distortion when the load impedance decreases. In contrast, the feed-forward error correction system in the AHB2 keeps the output clean when driving difficult loads. The AHB2 produces almost no measurable distortion at any rated load condition.
In our quest to build the ultimate amplifier, we also focused on frequency response, output noise, drive current, damping factor, and reliability. The result is an amplifier that stands head and shoulders above the competition.
This Benchmark product was designed, assembled, and tested in the USA using USA and imported components. Most major components are made in USA.
< 0.0003 % THD+N at full rated power, 20 Hz to 20 kHz
All speakers have variations in input impedance. Select loads based on nominal impedances not minimum impedances. The AHB2 is stable into all loads. The AHB2 is conservatively rated at an output level where THD+N is < 0.0003 % instead of the more typical 1% THD+N. Power at 1% THD will be higher.
< 0.0003 % THD+N at the following output voltages and load impedances, 20 Hz to 20 kHz
Use dBV to calculate the peak SPL from your speaker/amplifier combination. Use the following formula: Amplifier output voltage in dBV + speaker sensitivity at 2.83V – 9 dB. Example: (29.03 dBV at 8 Ohms) + (90 dB SPL @ 2.83V 1m) – 9 dB = 110 dB SPL at 1 meter
Rated output relative to output noise, inputs shorted
Output noise voltage, A-weighted, inputs shorted
Use dBV to calculate the SPL of the noise produced by your speaker/amplifier combination. Use the following formula: Amplifier output noise voltage in dBV + speaker sensitivity at 2.83V – 9 dB. Example: Mono mode driving very high efficiency speakers: (-100 dBV) + (104 dB SPL @ 2.83V 1m) – 9 dB = -5 dB SPL at 1 meter. This means that the system noise will be 5 dB below the threshold of hearing when driving speakers with a very high 104 dB efficiency.
Output noise relative to 2.83 Vrms, A-weighted, inputs shorted
1 kHz, 80 kHz LPF, at full rated output into any rated load
1 kHz, 20 kHz LPF, at full rated output into any rated load
No account yet?
Create an Account
Reviews
There are no reviews yet.